Firing Services
Do you create your work at home or in a private studio? We now offer firing services to finalize your creations.
How does it work?
Make sure you have read all the information contained on this page.
If you have any further questions about the process, consult our FAQ here.
1.
Fill in the form below, specifying: the type or brand of clay you are using and its firing specifications, the firing temperature you would like to reserve, whether you would like to use glazes from our workshop or whether you would like to reserve time in the workshop to glaze with your own materials.
2.
3.
Your work must be completely dry and ready to fire when dropped off. After we have contacted you by email, come to the studio at the specified drop-off time. Payment must be made by card only at the time of drop-off. Usually, your work is ready for pick-up within 1-3 weeks, depending on what's happening at the studio!
Price List
Bisque Firing (△06)
Half Shelf : 15$
Full Shelf : 30$
Full Kiln : 135$
Glaze Firing (△6)
Half Shelf : 20$
Full Shelf : 40$
Full Kiln : 180$
Glaze Sessions in Studio
1-hour Glazing Course 60$
Studio Rental 25$ per hour
Glazing Services 65$ per hour (we glaze your work for you)
-
At present, we only offer bisque firing at Cone 06 and glaze firing at Cone 6.
If you wish to fire your work at a different temperature, please specify below, we may be able to accommodate your request.
We have size restrictions of 7“ high x 12” wide. If your work exceeds this, we will charge you for an additional full shelf.
For bisque firings, we limit the number of pieces stacked to a maximum of 3 in order to respect height constraints and ensure the safety of your work.
All pieces must be cleaned at the base of all traces of glaze (¼ inch). If the piece's glaze runs onto the shelf, you will be charged a damage fee.
-
If you are already a member, you can reserve the workshop at a reduced hourly rate to glaze your own work.
-
Please provide proof that firing has been approved.
Firing times may vary depending on the amount of work in the workshop.
We reserve the right to refuse to fire any work.
Any damage to our kiln shelves or equipment will result in a minimum charge of $35.
Atelier Cône10 is not responsible for cracks, explosions or accidents that may occur during firing.