Firing Services

Do you work from home or in a private studio and need a place to fire your pieces? We now offer firing services to help you finalize your creations.

How it works

Fill in the contact form below with the following information:

Specify in your message :

  • Which firing temperature you would like to reserve.
  • The type of clay, glaze and other materials used for our piece to ensure it is suitable for the selected firing temperature.
  • Whether you would like to use our workshop glazes.
  • Or any other special request or question.


Bisque firing

  • Half shelf: $15
  • Full shelf: $30
  • Full Kiln: $135

Glaze Firing

  • Half shelf: $20
  • Full shelf: $40
  • Full Kiln: $180

Glazing session at the studio

  • Glazing course $60 (1 hour)
  • Use of workshop $25 per one-hour block.
  • We glaze for you $65 per hour.

Firing Services FAQ

  • At the moment, we only offer Bisque firing at Cone 06 and Glaze firing at Cone 6.
  • We have size restrictions of 7" high x 12" wide. If your work exceeds this, we will charge you for an additional full shelf.
  • For bisque firings, we limit the number of stacked pieces to a maximum of 3 in order to respect height constraints and guarantee the safety of your work.
  • All pieces must be cleaned at the base of all traces of glaze (¼ inch). If the piece's glaze runs onto the shelf, you will have to pay the cost of the shelf.
  • We offer a one-hour glazing course where you can learn how to use our glazes.
  • If you are already a workshop member, you can reserve the studio at an hourly rate to glaze your work.
  • If you like our glazes but don't have the time, we can glaze your pieces for you on an hourly basis.
  • Please bring proof that firing has been approved.
  • Your work must be completely dry and ready to fire when you drop it off.
  • Firing times may vary depending on the amount of work in the studio.
  • Payment must be made by credit card only at time of deposit.
  • We reserve the right not to accept to fire.
  • Once the firing has been completed, you will receive an e-mail so that you can pick up your pieces.
  • Any damage to our kiln shelves or equipment will result in a minimum charge of $30.
  • Atelier Cône10 is not responsible for cracks, explosions or accidents that may occur during firing.
  • Contact Form for Firing Services

    We will get back to you within 24 hours to finalize your reservation. Be sure to check your spam folder.

    Payment is only made in person at the time of deposit.