
Firing Services
Do you work from home or in a private studio and need a place to fire your pieces? We now offer firing services to help you finish your creations.
How it works
Complete the contact form below with the following information:
Specify in your message:
- What firing temperature do you want to reserve?
- The type of clay, glaze and other materials used for your piece to ensure it is suitable for the selected firing temperature.
- If you want to use glazes from the workshop.
- Or any other special request or question.
The costs :
Bisque firing
- Half shelf: $15
- Full shelf: $30
Glaze firing
- Half shelf: $20
- Full shelf: $40
Glazing session in the studio
- Glazing class $60 (1 hour)
- Use of the studio $25 per one-hour block.
- We glaze for you $65 per hour.
Firing Services FAQ
- For the moment, we only offer Cone Bisque 06 firing and Cone Glaze 6 firing.
- We have size restrictions of 7" high x 12" wide. If your work exceeds this, we will charge you for an additional full shelf.
- For bisque firings, we limit the number of stacked pieces to a maximum of 3 in order to respect height constraints and guarantee the safety of your work.
- All pieces should be cleaned at the base of any traces of glaze. If the glaze from the piece drips onto the shelf, you will need to pay the cost of the shelf.
- We offer a one hour glazing course where you will learn how to use our glazes.
- If you are already a member of the studio, you can reserve the studio at an hourly rate to glaze your work.
- If you like our glazes but don't have time to glaze, we can glaze your pieces for you on an hourly cost basis.
- Drop-offs and pick-ups take place on Thursdays from 6 p.m. to 8:30 p.m.
- Please bring proof that your firing has been approved.
- Your work should be completely dry and ready to fire when dropped off.
- Firing times may vary depending on the amount of work in the studio.
- Payment must be made by credit card only at the time of deposit.
- We reserve the right not to accept work for firing.
- Once the firing is done, you will receive an email so you can collect your pieces.
- Any damage to our kilns, shelves or other equipment will result in a minimum charge of $30.
- Atelier Cône10 is not responsible for any cracks, explosions or accidents that may occur during firing.
Form for firing services
- We will get back to you within 24 hours to finalize your reservation. Make sure to check your spam folder.
- Payment is only made in person at time of deposit.